Hunter Orion - Other System Settings

Other
Settings
Programmable Options
Language
English, Swedish, Norwegian, Finnish, German, Danish
Date/Time
Auto – camera will synchronize date/time after you enter
your time zone info.
Manual – manually set date/time.
Note! Adjust camera date/time to ensure some functions
work as expected.
Date Type
YY/MM/DD-(CN), MM/DD/YY-(US), DD/MM/YY-(EU)
Stamp
Imprints programmed camera ID, moon phase,
temperature, date, and time on photo.
Battery Type
Alkaline/ NI-MH
Choose correct battery type of used batteries in camera,
makes camera perform better.
Frequency
50Hz/ 60Hz – improper setting may cause camera screen
flicker
SD Cycle
Select “ON”, press “OK”, camera will continue to store
photos/videoclips by deleting earliest photos/videoclips.
Password
Select “ON”, press “OK”, to enable password protection for
your camera; support totally 6 digits long password access.
Reset
Select “Yes” to reset camera back to factory default
settings.
FW Update
With update firmware in the SD card, you can enter this
menu to update camera firmware by confirming “Yes” in the
options.
About
Firmware version in camera (Version/ IMEI/ MCU/ MOD)