Hunter Pro-C Controller User Manual

18
4. Turn the dial to SET STATION RUN
TIMES to continue programming the
selected program.
5. Press the
button to add an additional
start time, or for the next program.
NOTE: Regardless of the order in which the start
times are entered, the Pro-C will always arrange
the start times in chronological order when the
dial is moved off the SET WATERING START
TIMES position.
Eliminating a Program Start Time
With the dial set to the
SET WATERING
START TIMES position,
push the and
buttons until you reach
12:00 a.m. (Midnight).
From this position push the button once to
reach the OFF position.
NOTE: If a program has all four start times
turned off, then that program is off (all other
program details are retained). Because there
are no start times, there will be no watering with
that program. This is a convenient way to stop
watering on one program only without turning the
dial to the off position.
Setting Station Run Times (Length of
Watering for Each Area)
1. Turn the dial to the
SET STATION
RUN TIMES
position.
2. The display will
show the last
program selected (A, B, or C) the station
number selected, and the run time for that
station will be flashing. You can switch to
another program by pressing the button.
3. Use the
and buttons to change the
station run time on the display.
4. Press the
button to advance to the next
station.
5. Repeat steps 4 and 5 for each station.
PROGRAMMING (continued)
SET
WA
TERING
START
TIMES
SET STATION RUN TIMES
6. You may set station
run times from 1
minute to 6 hours.
7. You can move
between programs
while staying on the same station.
However, it is recommended that one
program is completed before going on to
the next program. Jumping between
programs can be confusing and may result
in program errors.
Setting Days to Water
1. Turn the dial to the
SET DAYS TO
WATER position.
2. The display will show
the last program
selected (A, B, or C)
the station number selected, and the run
time for that station will be flashing. You
can switch to another program by pressing
the button.
3. The controller displays currently
programmed active day schedule informa-
tion. This dial position provides four
different water day options: choose to
water on specific days of the week, you
can choose interval watering, or choose
to water on odd days or even days. Each
program can only operate using one type of
water day option.
SET DAYS TO WATER

Hunter Pro-C Controller Specifications

General

Brand	Hunter
Model	Pro-C Controller
Category	Controller
Language	English