7
Pro-C Controller
Heavy-Duty Cabinet
Built to overcome the elements—
for a long time
The Pro-C is built using a robust heavy-duty
plastic UL listed and NEMA 3R rated cabinet,
which is not subject to UV degradation or
color changes. For faster installation, the
cabinet door hinge pin is removable when the
door is unlocked and open. In addition, the
cabinet uses the same professional key lock
on the outdoor model as the Hunter ICC
commercial controller. The Pro-C cabinet is
also designed with a ¾"-1" knockout option
on the back of the cabinet, and a 1" opening
for low voltage
and a ½" opening
for high voltage
in the bottom of
the cabinet to
accommodate the
wiring needs of
any job.
Programmable
0-7 Day Rain Delay
No need to return to the controller
to turn it back on
The Pro-C allows you to turn off the
controller for a predetermined period of
time (1-7 days) during rainy weather. All
programs are affected, as this delay is global.
After the specified period has elapsed, the
controller will return to automatic mode and
water as scheduled. This delay feature is very
convenient because when the controller is
turned off for an event such as rain or a social
activity, the operator will not have to make a
trip to the site to reactivate the controller. In
residential systems, when the operator uses the
watering delay feature
thereʼs no need to worry
about remembering that
the controller has been
turned off.
Programmable Delay Between Stations
Slow closing valves and well recovery will
never be an issue
A programmable delay between stations solves
the problem of slow closing valves because of
a hydraulic overload condition. The delay also
solves the problem of a system operating off of
a slow filling well, allowing the well to recover
between zones. The Pro-Cʼs programming will
allow it to fit into any situation where a delay
is necessary, as the delay is programmable up
to four hours. Delays from 0 to 60 seconds are
allocated in 5-second increments and then up
to 4 hours in 1-minute increments. Note: If the
MV circuit is programmed to operate on the
zone, it will stay hot for the first minute of any
programmed delay.
To Next Page
Loading...
Need help?
General
