5
Ceiling Bracket Hanging Fan Wiring Installing Fan Body Blades Light Remote App
Insert the blade into the blade slot.
Repeat x5
Repeat x5
x15
bag
Blade Screw
x15
bag
Blade Washer
Put the blade washers found in the
hardware bag onto the blade screws
found in the hardware bag. Then install
the blade screws to secure each blade to
the fan.
4 of 4
Canopy Screw
bag
Install the remaining two
canopy screws by holding the
fan body cover to the ceiling
mounting plate. Tighten all
four screws securely.
Align the hanging slots on both
sides of the fan body with the two
partially installed canopy screws.
Slide the two slots on both sides of
the fan body between the head of
the screws and rotate the fan body
counter clockwise so the screws
hold the fan body rmly in place.
Using both hands, lift the fan body
from the hook
FAN FALL HAZARD
Make sure to secure the canopy.
To Next Page
Loading...
Need help?
General