Hunter SET & SAVE 44155C User Manual

21
4. Place the top of the thermostat over the two
tabs on the wall plate. Press the thermostat
onto the wall plate and press to snap the
bottom tab into place.
Note: Do not force the thermostat onto the wall plate,
as the terminal pins may be damaged. If the thermostat
does not snap into place properly, the unit may not
work.
5. Insert two AA alkaline batteries.
6. Restore power at the electrical panel or
furnace.
INSTALLING THE THERMOSTAT, CONT.

Hunter SET & SAVE 44155C Specifications

General

Brand	Hunter
Model	SET & SAVE 44155C
Category	Thermostat
Language	English