35
METHODS OF OPERATION, CONT.
3. CREATING CUSTOM PROGRAMS
• Program times can be set in 10 minute
increments.
• Program temperature can be set in
increments of 1
o
F (1
o
C).
• After 15 seconds of inactivity during
programming, the thermostat will return to
Normal Display mode.
• When setting the program time, note the AM/
PM indicator.
• Press
Hold/Return at any time to exit Program
mode.
1. Slide the
system switch to HEAT or COOL to
program the corresponding system.
2. Press Program to enter Program mode. (The
LCD will begin to ash)
To Next Page
Loading...
