HunterDouglas PowerView Pebble User Manual

Replacing batteries in the remote
Replacing the batteries in the remote module will not cause the
loss of any window covering programming, including GROUPS
and FAVORITE. The remote uses two CR 2032 batteries.
1. For the Pebble
®
Remote, slide your thumb in the
indentation, gently lift and remove the remote module
from the Pebble. For the Surface Remote, remove the
Surface from its mounting plate by twisting the Surface
counter-clockwise. Push the remote module out from
the back of the Surface.
2. Rotate the back cover of the remote module
clockwise to unlock.
3. Remove the back cover from the remote module.
2928
BATTERY REPLACEMENT
BATTERY REPLACEMENT

HunterDouglas PowerView Pebble Specifications

General

Brand	HunterDouglas
Model	PowerView Pebble
Category	Remote Control
Language	English