HunterDouglas PowerView Pebble User Manual

IMPORTANT: The PowerView
®
Remote will not operate a
window covering until the window covering has been added
to a GROUP.
Getting started
First, activate the remote by pulling both plastic tabs from the
back battery compartment.
NOTE: If placing the remote module into a Pewter or Clear
Frost Pebble
®
, ensure the provided color insert is seated at the
bottom of the Pebble cutout.
10
GETTING STARTED
GETTING STARTED
11
Inserting the remote module into the PowerView
®
Pebble
®
(hand-held):
1. Center the Hunter Douglas logo on the remote
module above the indentation on the bottom rim
of the Pebble.
2. Align the ribs on the remote module with the grooves
on the Pebble.
3. Gently push the remote module into the Pebble until
it is snug.
Ribs on remote
to be aligned
with the
grooves on
the Pebble.
Center logo

HunterDouglas PowerView Pebble Specifications

General

Brand	HunterDouglas
Model	PowerView Pebble
Category	Remote Control
Language	English