What to do if Huntleigh FM800Encore shows a high percentage of signal loss?
If your Huntleigh Medical Equipment displays a high percentage of signal loss, first check the transducer placement. If the issue persists, verify if the transducer is broken. As an alternative, consider switching from Ultrasound to FECG.
How to troubleshoot no FHR signal displayed on Huntleigh FM800Encore?
If no FHR signal is displayed on your Huntleigh Medical Equipment, ensure that the FM800E is switched on and that the FHR transducer is properly connected.
What to do if Huntleigh Medical Equipment doesn't print FHR trace?
If your Huntleigh Medical Equipment is not printing the FHR trace, verify that the Print button has been pressed. Also, check if there is paper in the paper tray and ensure that the paper tray is fully pushed in.
Why is the alarm not working on my Huntleigh FM800Encore Medical Equipment?
If the alarm is not working on your Huntleigh Medical Equipment, it's possible that the alarm has been turned off.
What to do if Huntleigh FM800Encore Medical Equipment shows only one trace or superimposed traces when monitoring twins?
If you are monitoring twins and your Huntleigh Medical Equipment displays only one trace or the traces are superimposed, correct the 'FHR scale for twins' setting in the Printer setup.
Why is there no beep when button pressed on Huntleigh FM800Encore?
If there is no beep when a button is pressed on your Huntleigh Medical Equipment, the beep function may be turned off.
General| Type | Fetal/Maternal Monitor |
|---|---|
| Display | LCD |
| Fetal Heart Rate Range | 50-210 BPM |
| Maternal Heart Rate Range | 30-240 BPM |
| Ultrasound Frequency | 1 MHz |
| Paper Speed | 1, 2, 3 cm/min |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| TOCO Range | 0-100 units |
Information on CE mark validity and approved accessories.
Alerts users to potential serious outcomes like death, injury, or adverse events.
Alerts users to exercise care for safe and effective use of the monitor.
Details of the FM820Encore fetal monitoring capabilities.
Details of the FM830Encore fetal/maternal monitoring capabilities.
Overview of system controls and interface elements on the monitor.
Dimensions, weight, and physical characteristics of the monitor models.
Operating and storage conditions including temperature, pressure, and humidity.
Electrical specifications including voltage, frequency, and fuse ratings.
Technical specifications for the ultrasound transducer and its performance.
Technical specifications for fetal electrocardiogram (FECG) measurements.
Specifications for external uterine activity (Toco) monitoring.
Specifications for internal uterine pressure (IUP) monitoring.
Specifications for maternal heart rate and ECG monitoring.
Specifications for maternal blood pressure measurement including method and ranges.
Specifications for maternal pulse oximetry (SpO2) and heart rate.
Instructions for placing the monitor on a stable surface.
Instructions for securely attaching the monitor to a trolley.
Instructions for mounting the monitor on a wall using a kit.
Test for integrity of the power cord ground wire to the instrument chassis.
Test for earth leakage current compliance with IEC60601-1 standards.
Test for patient leakage current in accordance with IEC60601-1.
Test for patient leakage current with AC mains voltage on applied parts.
Test for auxiliary current according to IEC60601-1 standards.
Lists required equipment for performance verification tests.
Procedure to verify the monitor's power-on status and LEDs.
Procedure to check display for damage and verify screen brilliance settings.
Procedure to enter and verify patient details in the Info Box.
Procedure to change and verify language settings.
Procedure to verify and correct time and date settings.
Procedure to test Fetal ECG (FECG) signal input and display.
Procedure to test maternal SpO2 and heart rate with simulator.
Procedure to test non-invasive blood pressure (NIBP) using a simulator.
Procedure to test ultrasound signal input and fetal heart rate trace.
Procedure to test TOCO transducer input and zeroing function.
Visual representation of the FM800E's functional blocks and connections.
Description of the digital board's functions and components.
Description of the signal processing board's functions and components.
Description of the module board and OEM modules.
Description of the front panel board, keypad, and LCD interface.
Steps to remove the main chassis cover, including screw locations and torque.
Steps to detach and remove the NIBP module from the unit.
Steps to remove the module PCB using mounting screws.
Steps for disassembling the front panel and its associated components.
Details on removing the signal processing board, noting mounting differences.
Steps for removing the digital board, including connector and screw locations.
General cleaning and inspection guidelines for the monitor unit and power lead.
Cleaning instructions for SpO2 equipment, avoiding autoclaving or immersion.
Cleaning and disinfection guidelines for patient ECG leads.
Guidelines for keeping transducers dry and cleaning ultrasound transducer gel.
Procedure for cleaning the print head to improve chart recording quality.
Steps for replacing the internal battery, including desoldering and polarity.
Recommendations for preventative maintenance checks at 6-month intervals.
Information on how to order spare parts, including required details.
List of recommended spare parts with part numbers and descriptions.
To Next Page