10
Installation Guide
3.6.2 Table Pedestal
Figure 7 - Front view of Table pedestal and location of slide lock.
The LP110 will slide onto the table pedestal and lock into place.
The table pedestal should be fi tted directly to the scanner bed by locating the pole into
the fi xing hole provided.
Ensure the pole is pushed fully home and has locked into place ensuring that the table
pedestal is pointing in the direction that you want the monitor to face.The table pedestal
has 180° of rotation.
Figure 8 - CT Scanner Mounting on a Table Pedestal
Slide mount lock
To Next Page
Loading...
