7
Introduction
2. Introduction
2.1 Unpacking / Preliminary Checks
Contents
INSTRUCTIONS
FOR USE
Delivery Inspection
Huntleigh takes every precaution to ensure that goods reach you in perfect
condition. However, accidental damage can occur in transit and storage.
For this reason we recommend that a thorough visual inspection is made
immediately the unit is received. Should any damage be evident or any parts
missing, ensure that Huntleigh or your distributor is informed at once.
Storage
Should the unit not be required for immediate use, it should be re-sealed into
its original packing after carrying out the initial delivery inspection, and stored
under covered conditions at a temperature between +14°F to +104°F (-10°C to
+40°C), and relative humidity of 10% to 93% non-condensing.
2.2 Battery Insertion / Replacement
1
2
3
Note: Remove the battery if the unit is not likely to be used for
some time.
To Next Page
Loading...
Need help?
General
