Need help?Do you have a question about the Huntleigh Dopplex ABIlity DA100PB and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | Dopplex ABIlity DA100PB |
| ABI Measurement | Yes |
| Probe Frequency | 8 MHz |
| Display | LCD |
| Power Source | Rechargeable Battery |
| Cuff Inflation | Automatic |
| Application | Ankle Brachial Index (ABI) Measurement |
| Weight | 1.5 kg |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Lists standards the dopplex Ability complies with.
States conformity with Medical Devices Directive.
Details equipment classification based on safety standards.
Explains warning and caution symbols used in the manual.
Lists critical safety warnings for operation.
Provides cautions, specifically ESD precautions.
Outlines requirements for connecting to other electrical equipment.
Discusses interference and compatibility of the device.
Explains ESD effects and precautions.
Details service and warranty terms and procedures.
Provides contact information for the manufacturer and service.
Step-by-step instructions for connecting the battery.
Identifies front panel components and their functions.
Identifies components on the rear panel.
Details the base components of the unit.
Explains safety and compliance labels on the product.
Explains setup menus and user interface navigation.
Details requirements for connecting the device to other systems.
Details the components and function of the Base PCB.
Details the components and function of the Daughter PCB.
Details the components and function of the Regulator PCB.
Details the components and function of the Front Panel PCB.
Details the components and function of the Printer Interface PCB.
Details the components and function of the Manifold assembly.
Illustrates the pneumatic layout and components.
Explains the process of cuff inflation and deflation.
Details the function of brachial occlusion cuffs.
Details the function of ankle occlusion cuffs.
Explains the function of all detect chambers.
Describes how systolic pressure is determined.
Explains how system faults are detected and reported.
Details the device's safety and operational classification.
Lists performance metrics like pressure range and PVR.
Specifies operating and storage environmental conditions.
Provides general specifications like voltage, size, and weight.
Lists necessary tools for disassembly and assembly.
Step-by-step guide to remove the front case.
Step-by-step guide to remove the rear case.
Instructions for removing the Base PCB.
Guide for replacing the keypad.
Instructions for removing and replacing connectors.
Instructions for replacing the IEC mains inlet.
Guide for replacing the printer door and roller.
Instructions for replacing the printer mechanism.
Instructions for replacing the fuse.
Instructions for replacing the PSU module.
Instructions for replacing the Regulator PCB.
Instructions for replacing the pump.
Instructions for replacing a valve.
Instructions for replacing a solenoid valve.
Instructions for replacing the Over Pressure PCB.
Instructions for replacing the Base PCB.
Instructions for replacing the manifold assembly.
Instructions for replacing the RTC battery.
Details the product's safety classification.
Procedure for electrical safety testing of the mains inlet.
Procedure for electrical safety testing of the USB port.
Procedure for electrical safety testing of the printer.
How the unit prompts for and records service.
Instructions for replacing the air filter.
Guide for battery conditioning and replacement.
How to inspect and test the cuffs.
Areas to inspect during routine service.
How to check and replace the RTC battery.
Procedure to verify pneumatic system integrity.
Procedure to test cuffs for leakage.
Checks pressure sensors and overpressure function.
Steps to calibrate pressure readings.
Procedure to test the printer's output quality.
Guide for upgrading via the internet.
Guide for upgrading without internet access.
Overview of fault modes and their classification.
Details user-facing fault messages.
Lists internal hardware/software faults and severity.
Guidance on ordering spare parts.
Lists part numbers and descriptions for the front case assembly.
To Next Page