Hurco TM6 - Sub Spindle Turning

The final examples will show how to program on the sub
spindle.
Tools
9. Sub Spindle Turning Tool
Turning on the sub spindle is identical to the main with one
difference, all moves will be positive instead of negative.
G103
T0909
Y0.
G109
G92 S1500
G97 M3 S500
G0 G95 Z-.25
X2.25
G96 G1 X2.1 F.004 (CONSTANT SURFACE SPEED)
G72 U.1 R.1 (U is depth of cut R is retract distance)
G72 P5 Q6 U0.005 W0.005 F.002 S1000 T0101
N5 G1 X2.0 Z0.
X-.04
N6 Z-.05
G0 X2.25 Z-.25 (RETURN TO SAFE POSITION)
G70 P5 Q6 F.002 S1000
G0 X2.25 Z-.25 (RETURN TO SAFE POSITION)
M5 (STOP SPINDLE)
G28 U0.
G28 W0.
When machining on the sub spindle the X should be sent
home first and then the Z.