Hurco TM8 - Page 8

G71 U.1 R.1
G71 P3 Q4 U.005 W.002 F.005 S1000
N3 G1 Z.05 X.95
Z0.
X1.Z-.025
Z-.5
X1.2
X1.25 Z-.55
Z-1.
G2 X1.75 Z-1.25 R.25
G1 X1.95
X2. Z-1.3
N4X2.05
X2.25 Z.25 (RETURN TO SAFE POSITION)
Now the profile is roughed finishing can be done with one line of code.
G70 P3 Q4 F.002 S1000
X2.25 Z.25 (RETURN TO SAFE POSITION)
M5 (STOP SPINDLE)