8
4.3 KEY IGNITION SWITCH (Fig. 4.1 no.3)
– On being released at the «START» position,
– After turning the engine on, turn the lights on
-
LIGHTS ON» position.
4.4 PARKING BRAKE (Fig. 4.1 no.4)
«A
«B
position «A».
4.5 CUTTING MEANS ENGAGE AND
BRAKE CONTROLS (Fig. 4.1 no.5)
disengaged
-
4.6 CUTTING HEIGHT ADJUSTMENT
LEVER (Fig. 4.1 no.6)
notches.
4.7 REVERSE GEAR CUTTING CONSENT
BUTTON (Fig. 4.1 no.7)
-
stop.
Mechanical transmission
4.21 CLUTCH / BRAKE PEDAL
(Fig. 4.2 no.21)
part of its travel it acts as a clutch, engaging
IMPORTANT Do not keep the pedal half
way between clutch engagement or disen-
gagement, as this can cause overheating and
damage the transmission belt.
NOTE When the machine is in movement,
keep your foot off the pedal.
4.22 SPEED CHANGE LEVER
(Fig. 4.2 no.22)
-
reverse «R».
WARNING! Reverse must be en-
gaged when the machine has stopped.
Hydrostatic transmission
4.31 BRAKE PEDAL (Fig. 4.3 no.31)
4.32 CLUTCH PEDAL (Fig. 4.3 no.32)
speed.
To Next Page
Loading...
