17
7.3 Pulling
- HURST chain sets are to be used for pulling purposes.
- Before the pulling process can be performed, ensure that the bolt and hook t correctly to
prevent the chain from slipping.
- Only chain sets in perfect condition may be used.
- The pull chains are to be inspected at least once per year by an expert.
- See separate operating instructions for the relevant chain set!
Mounting bore for
chain set
WARNING / CAUTION!
The light metal alloy spreader arms may not be damaged.
AThe connecting pieces for HURST chain
sets are fastened to the blades using
load bolts in holes "A". (see illustration
on the right)
Permissible chain sets:
for SP 333: KSV 11
for SP 555: KSV 11
for SP 777: KSV 11
NOTE:
Also take note of all the instructions and regulations in the separately provided
operating instructions for the chain sets.
To Next Page
Loading...
