HURST SP 333 - Peeling; Recommended Hydraulic Fluid; Operating and Storage Temperature Ranges; Oscillation; Vibration

36
12.2 Recommended hydraulic uid
12.3 Operating and storage temperature ranges
CAUTION!
Before using hydraulic uids, which do not correspond to the above-mentioned
specications and/or are not purchased from HURST, you have to contact
HURST itself!
Hydraulic uid for HURST hydraulic equipment:
Mineral oil DIN ISO 6743-4 and others
Oil temperature range Oil code Viscosity rating Remarks
A
-20 .... +55°C
HM 10 VG 10
-4.0 .... +131°F
recommended viscosity range: 10...200 mm²/s (10…200 cSt.)
Supplied with HM 10 DIN ISO 6743-4.
Operating temperature [°C] / [°F] -20 … +55 -4 … +131
Ambient temperature
(device in operation)
[°C] / [°F] -25 … +45 -13 … +113
Storage temperature
(device not in operation)
[°C] / [°F] -30 … +60 -22 … +140
The total oscillation value / vibration value to which the upper limbs are exposed, is usually
below 2.5 m/s².
Higher values may be measured for short periods as a result of interaction with the materials
to be processed.
12.4 Oscillation / vibration
12.1 Peeling
Device type SP 333 SP 555 SP 777
Max. sheet
steel thickness “t”
[mm] 2 3 4
[in.] 0.08 0.12 0.16
Max. possible opening
[mm] 510 640 725
[in.] 20.1 25.2 28.5