HURST eDRAULIC SP 333 E2 - User Manual

271333085 EN
eDRAULIC spreader
replaces 11.2018
Edition 09.2019
Instruction manual for rescue equipment
(Original instruction manual)
SP 333 E2
SP 555 E2
SP 777 E2

Summary

1. Danger Classifications

2. Product Safety

General Safety Guidelines and Warnings

Covers general safety principles and specific warnings for safe operation.

3. Proper Use

4. Functional Description

4.1 Description and Components

Overview of spreader design, operation, and key parts.

4.3 Hydraulic Circuit and Controls

Diagram of the hydraulic system and explanation of movement controls.

5. Operation

5.1 Power Source Connection

Instructions for connecting batteries or external power supplies.

5.2 Operating the Star Grip

Guidance on using the star grip for opening and closing the device.

6. Operational Functions

6.1 Safety Notes for Operations

Critical safety precautions before and during rescue operations.

6.2 Spreading, Pulling, Squeezing, and Peeling

Procedures and guidelines for key operational functions.

7. Dismantling and Deactivation

8. Maintenance and Service

8.1 Oil Change and Inspections

Guidelines for oil changes and routine inspections.

8.2 Spreader Overview and Checks

Checklist for visual inspection of the spreader and its components.

8.3 Protective Equipment and Filter Checks

Inspection of protective gear and battery shaft filter.

9. Repairs and Preventive Service

9.1 General Information and Care Instructions

Guidelines for authorized repairs, spare parts, and device care.

9.3 Component Replacement Procedures

Detailed steps for replacing key components like tips, handles, and covers.

10. Troubleshooting

11. Technical Data

11.1 eDRAULIC Spreader Specifications

Technical specifications for SP 333 E2 and SP 555 E2 models.

11.2 Peeling, Noise, and Temperature Data

Peeling capabilities, noise emission, and operating temperature limits.

11.5 Oscillation and Vibration

Information on oscillation and vibration values for user safety.

12. Accessories

12.1 Batteries and Chargers

Details on approved batteries, their operation, and charging.

12.3 Power Supply Unit

Information on using the device with an external power supply.

12.4 Chain Sets for Pulling

Specific chain sets required for pulling operations.

13. Instructions Regarding Disposal

14. Notes

HURST eDRAULIC SP 333 E2 Specifications