HURST eDRAULIC SP 333 E2 - 5.2 Operating the Star Grip

14
Procedure:
 1. Unplugthepowersupply(whereused)fromthemains.
 2. Fullypressdownthetwounlockingbuttonsandcarefullypullthebatteryorpower
supplyoutofthedevice.
Do not use force!
 3. Thebatterycannowberechargedinthecharger(pleasetakenoteoftheseparate
operatinginstructionsforthechargerandthebatteriestobeused);alternatively,the
powersupplycanbereplaced.
 4. InserttherechargedornewbatteryintotheeDRAULICdeviceuntilitreachesthe
stop.Thebatteryorpowersupplywillbeautomaticallylockedwhencorrectlyoper-
ated.
Connectionslot
Opening the device ( ):
Turnthestargripinaclockwisedirection(inthedirectionofthe
relevantsymbol)andkeepinthisposition.
Closing the device ( ):
Turnthestargripinancounterclockwisedirection(inthedirection
oftherelevantsymbol)andkeepinthisposition.
"Dead-man’s" function:
Followingrelease,thestargripautomaticallyreturnstothe
centralposition,fullyguaranteeingloadretention.
5.2 Operating the star grip
(alsoseechapteron"Operatingmovementcontrol")