HURST eDRAULIC SP 333 E2 - Pulling

17
6.3 Pulling
WARNING / CAUTION / PLEASE NOTE!
The light metal alloy spreader arms may not be damaged.
- HURSTchainsetsmustbeusedforpulling.
- Whenusingachainforpulling,makesurethatthepinsandhooksarepositionedcorrectly
sothatthechaincannotslip.
- Onlychainsetsinperfectconditionmaybeused.
- Thepullingchainsmustbecheckedbyanexpertatleastonceayear.
- Alsoconsulttheseparateoperatinginstructionsforthecorrespondingchainset!
Workingsurfaceistoo
small,tipsslipo󰀨.Only
forincreasingthesize
ofagap(notsuitable
forspreading)
Tipsgetasafegrip. Onlyworkwiththetips,
sothatthespreader
isnotdamagedinthe
areaofthelightmetal
arms.
Mountingborefor
chainset