HURST eDRAULIC SP 333 E2 - 12.3 Power Supply Unit

39
12.3 Power supply
NOTE:
Paystrictattentiontotheseparateoperatinginstructionsforthepowersupply.
12.2 Battery charger
Onlythe"eDRAULICPowerPackCharger"maybeusedforthelithium-ionbatteries.
NOTE:
Paystrictattentiontotheseparateoperatinginstructionsforthebatterycharger.
TheeDRAULICdeviceshaveaspeciallydevelopedpowersupplywithwhichthedevices
can be directly connected to the power grid. The power supply converts the alternating
currentfromthepowergridintodirectcurrent,whichmeansthatitcanbeusedinsteadof
thebattery.
Structure:
There is an adapter on one side of the power supply which can be simply inserted into
theconnectionslotofthedevicesandlocked.Theothersidehasamainsplug.Bothare
connected by a cable.The mains plug isa Schuko plugwith Protection Classication IP
68oraUSplug.TheintegratedlterisappropriatefortheconversionofACvoltagetoDC
voltage.
Adapter
Mainsplug
Cable
Filter
Cable