HURST eDRAULIC SP 333 E2 - 11. Technical Data

34
11. Technical data
NOTE:
Thefollowingtablescontainonlythetechnicaldatanecessaryforoperationand
storage.
FurtherinformationaboutyourdeviceisavailabledirectlyfromHURST.
Sinceallvaluesaresubjecttotolerances,minordi󰀨erencesmayoccurbetweenthedataon
yourequipmentandthedatainthefollowingtables.
The values may also di󰀨er because of reading inaccuracies and/or tolerances in the
measuringequipmentused.
Operating pressure: SP333E2: 70MPa
   SP555E2: 70MPa
   SP777E2: 70MPa
ContactanauthorisedHURSTdealerortheHURSTCustomerServiceDepartmentdirectly
ifthemalfunctionscannotberectied.
TheaddressfortheHURSTCustomerServicedepartmentis:
HURST JAWS OF LIFE, INC
A Unit of IDEX Corporation
711N.PostRoad
Shelby,NC28150USA
Phone: (704)487-6961
Fax: (704)487-7271
e-mail: contacthurst@idex.com