HURST eDRAULIC SP 333 E2 - 6.2 Spreading, Pulling, Squeezing, and Peeling

16
It is strictly prohibited to reach into the path of the
rescue device (e.g. between the spreader arms and the
material/object to which the force is to be applied)!
CAUTION / PLEASE NOTE!
The strong e󰀨ect of the force of the rescue equipment during operation could
causepiecesof the vehicle tobreako󰀨 or y o󰀨,posinga danger topersons.
Those not involved in the rescue operation should therefore keep at a safe
distance appropriate to th
esituation.Any trappedor enclosedpersons must
beprotected.
6.2 Spreading
Usethefrontofthetipsonlytoincreaseanexistinggap.Toincreasegripandtoavoidhaving
thetipssliporbreakoutoftheparttobeprocessed,thegripshouldbereappliedatanearly
stage.Thehighestforcedevelopsintherearareaoftheplug-ontip.
WARNING / CAUTION / PLEASE NOTE!
The light metal alloy spreader arms may not be damaged.
Spreading
Enlargingagap
approx25mm
approx. 1 in
The spreaders have additional exchangeable plates to protect the arms against physical
damage.
Spreadingisonlyalloweduptothispoint.