HURST eDRAULIC SP 333 E2 - 11.1 eDRAULIC Spreader Specifications

35
11.1 eDRAULIC spreader
Device type SP 333 E2 SP 555 E2
Item number 271333000 271555000
Dimensions (excluding battery)
LxWxH
[mm] 905x255x285 1002x265x280
[in.] 35.6 x 10.0 x 11.2 39.4 x 10.4 x 11.0
Minimum spreading force
(atadistanceof25mm/
0.98inchesfromthetips)
[kN] 42 52
[lbf.] 9442 11690
Max. possible spreading
force *
[kN] 836 658
[lbf.] 187940 147924
LSF spreading force
(accordingtoNFPA)
[kN] 39 49
[lbf.] 8768 11016
HSF spreading force
(accordingtoNFPA)
[kN] 63 72
[lbf.] 14162 16186
Maximum spreading path
[mm] 600 730
[in.] 23.6 28.7
Maximum pulling force
(withapprobiatechainset)
[kN] 56 58
[lbf.] 12589 13039
Pulling path
(withapprobiatechainset)
[mm] 440 569
[in.] 17.3 22.4
HPF pulling force
(according
toNFPA)
[kN] 43 46
[lbf.] 9667 10341
LPF pulling force
(according
toNFPA)
[kN] 23 28
[lbf.] 5171 6295
Mass (excl. battery)
[kg] 17,3 20,0
[lbs.] 38.1 44.1
Nominal electrical voltage
(withpowersupply)
[V] 25,2 25,2
Nominal electrical voltage
(withlithium-ionbattery)
[V] 25,2 25,2
Protection category
IP54 IP54
*Computedvalue