HURST eDRAULIC SP 333 E2 - 7. Dismantling and Deactivation

20
Onceworkhasbeencompleted,thedevicearmsshouldbecloseduntilthetipsareonlya
fewmillimetersapart.Thisrelievesthehydraulicandmechanicalstrainontheequipment.
Clean the rescue device after each operation and grease both the metallic and the
mechanicallymovableparts.Thelockofthespreaderplug-ontipsshouldalsobegreased
fromtimetotime.
Greasingprovidesprotectionagainstexcessivewearandtearorcorrosion.
Avoidstoringtherescueequipmentinadampenvironment.
NOTE:
NeverstoretheeDRAULICdeviceswithfullyclosedarms!Byfullyclosingthe
armshydraulicandmechanicaltensionmaydevelopinthedevice.
7. Dismantling the equipment / deactivation following operation
WARNING / CAUTION!
Withparticularlyhardmaterials,chipsmaybreakoutinanuncontrolledmanner.
Pleasemaintainthesafetydistance!