35
type SP 555 SP 777
ref. no. 271086000 271087000
min. spreading force
(25mm / 0.98in. from the tips)
[kN] 52 63
[lbf.] 11690 14160
max. possible spreading force *
[kN] 658 600
[lbf.] 147924 134900
spreading force HSF
(according to NFPA)
[kN] 72 85
[lbf.] 16186 19110
spreading force LSF
(according to NFPA)
[kN] 49 59
[lbf.] 11016 13260
max. spreading distance
[mm] 730 813
[in.] 28.7 32.0
max. pulling force
(with approbiate chain set)
[kN] 58 60
[lbf.] 13039 13490
pulling distance
(with approbiate chain set)
[mm] 569 655
[in.] 22.4 25.8
pulling force HPF
(according to NFPA)
[kN] 46 49
[lbf.] 10341 11016
pulling force LPF
(according to NFPA)
[kN] 28 30
[lbf.] 6295 6744
dimensions
l x w x h
(w/o connection hoses)
[mm] 823 x 285 x 202 898 x 308 x 202
[in.] 32.4 x 11.2 x 7.95 35.4 x 12.1 x 7.95
weight incl. hydraulic uid
[kg] 16,2 19,7
[lbs.] 35.7 43.4
max. operating pressure **
[Mpa] 70 70
[psi.] 10000 10000
min. needed volume
of hydraulic uid ***
[cm³] 240 385
[gal.-US] 0.07 0.10
coupling system mono-coupling mono-coupling
classication acc. to DIN EN 13204 AS 52/730 - 16,2 BS 63/813 - 19,7
* Computed value
** 1 MPa = 10 bar
*** Necessary volume of hydraulic uid in the hydraulic unit to operate the unit
(dierential volume on piston / rod side)
To Next Page
Loading...
