Do you have a question about the Husky 937-790 and is the answer not in the manual?
Essential safety guidelines and warnings for operating the inflator safely.
Technical details and operating parameters of the 12-Volt inflator.
Step-by-step guide on how to replace the fuse in the 12-Volt plug.
Instructions for cleaning and maintaining the inflator's condition.
Essential safety guidelines and warnings for operating the inflator safely.
Technical details and operating parameters of the 12-Volt inflator.
Step-by-step guide on how to replace the fuse in the 12-Volt plug.
Instructions for cleaning and maintaining the inflator's condition.
| Product Type | Angle Grinder |
|---|---|
| Voltage | 120V |
| No Load Speed | 11000 RPM |
| Power Source | Corded |
| Spindle Thread | 5/8 in. - 11 |
| Wheel Diameter | 4.5" |
| Amps | 6.5A |