To Next Page
J
Joshua JohnsonJul 28, 2025
What to do if my Husky HD12120 Power Tool inflator does not start?
- MMr. Lucas SmithJul 28, 2025
If your Husky Power Tool inflator isn't starting, first, ensure the power cord is properly plugged into a working outlet. If it's plugged in, check if the circuit breaker has tripped and reset it if necessary. Also, verify if the fuse in the 12 Volt vehicle cord is blown and replace it if needed. Lastly, the preset pressure setting may be below the actual pressure of the item you are inflating, so adjust the preset pressure to a higher level.
General
