To Next PageTo Next PageWhat to do if my Husky H12120N will not start?
If your Husky Power Tool isn't starting, first, ensure the power cord is properly plugged into a working 120-Volt AC outlet. If it's plugged in, check if the circuit breaker has tripped and reset it if necessary. If you're using a 12-Volt DC power cord, inspect the 10-Amp fuse and replace it if it's blown.
General| Brand | Husky |
|---|---|
| Model | H12120N |
| Category | Power Tool |
| Language | English |
Guidelines for polarized plugs, outlets, and extension cords for safe operation.
Lists all included parts and accessories with their descriptions and quantities.
Steps for connecting the inflator to a power source and tire valve.
Instructions for setting target PSI and starting/stopping the inflation process.
Procedure for safely removing the inflator from the tire and power source.
How to turn the LED worklight on or off.
Steps for connecting the inflator with appropriate accessories for toys/mattresses.
Procedure for safely removing accessories and power source.
Guidelines for servicing double-insulated products by qualified personnel.
Instructions on how to check and replace the 10-Amp fuse.
Methods for cleaning and maintaining the inflator for optimal performance.
Identifies common problems and their solutions for the inflator.
Provides recommended pressure ranges for various vehicle tires and sports balls.
