Need help?Do you have a question about the Huskylock 340D and is the answer not in the manual?
General| Maximum Stitch Width | 7 mm |
|---|---|
| Stitch Length | 1 mm to 4 mm |
| Speed | Up to 1300 stitches per minute |
| Presser Foot | Snap-on |
| Type | Serger |
| Number of Threads | 2, 3, or 4 |
| Stitch Types | Overlock |
| Threading | Color-coded threading guides |
Diagram illustrating the machine's parts and their labels for identification.
Placing the machine, connecting the foot control, and operating the power switch.
Instructions on how to correctly insert sewing machine needles.
A chart suggesting appropriate needles and threads for different fabric types.
General steps and sequence for threading the overlock machine, including looper and needle threads.
Detailed procedure for threading the lower and upper loopers.
Step-by-step guide for threading the left and right needles.
How to perform a test stitch to check for uniformity and make adjustments.
Explains how thread tensions affect stitch quality and provides initial settings.
How to adjust stitch length and recommended settings for different hems.
Step-by-step guide to changing the needle plate and presser foot for different stitch widths.
Explanation of the differential feed mechanism and its purpose.
A table listing common machine problems, their probable causes, and solutions.
To Next Page