Why am I experiencing layer slippage with my Husqvarna Viking Sewing Machine?
Layer slippage with your Husqvarna Viking Sewing Machine may occur if the foot pressure is not adjusted properly.
General| Type | Mechanical |
|---|---|
| Number of Stitches | 22 |
| Maximum Stitch Width | 5 mm |
| Maximum Stitch Length | 4 mm |
| Needle Positions | 3 |
| Bobbin Type | Class 15 |
| Included Accessories | Bobbins, Screwdriver, Spool caps |
| Presser Feet | Buttonhole foot, zipper foot |
Instructions for connecting the sewing machine to the power outlet and turning it on.
Procedure for safely removing and inserting needles.
Correctly positioning the thread spool on the spool pin.
Steps for safely removing the bobbin from the bobbin case.
How to use the stitch selection dial to choose stitch patterns.
Setting the stitch length dial for desired stitch size.
Step-by-step guide for performing straight stitch sewing.
Instructions for cleaning lint and dust from the hook assembly area.
Procedure for inserting and securing the bobbin case.
Steps for removing and installing the sewing machine light bulb.
To Next Page