Husqvarna 120 Mark II - Accessories; Guide Bar and Saw Chain Combinations

unit
120 Mark II
(P02138HV)
Fuel and lubrication system
Oil pump capacity at 9000 min
-1
ml/min 7
Oil tank volume cm
3
200
Type of oil pump Automatic
Saw chain and guide bar
Standard guide bar length cm (in) 35-40 (14-16)
Recommended bar lengths cm (in) 35-45 (14-18)
Usable cutting length cm (in) 34-39 (13.5 -15.5)
Maximum saw chain speed m/s 22.3
Saw chain pitch mm (in)
8,3 (0.325)
9,52 (3/8)
Thickness of drive links (gauge) mm (in) 1.3 (0.05)
Type of drive sprocket Spur
Number of drive sprocket teeth
6 (drive sprocket 3/8)
7 (drive sprocket
0,325)
Accessories
Guide bar and saw chain combinations
The cutting attachments below are approved for the
product.
Guide bar Saw chain
Length, cm (in) Pitch, mm (in) Gauge, mm (in) Max. nose radius Type Drive link count
33 (13) 8,25 (0,325) 1,3 (0,050) 10T Husqvarna H30 56
38 (15) 8,25 (0,325) 64
35 (14) 9,52 (3/8) 7T Husqvarna H37 52
40 (16) 9,52 (3/8) 56
45 (18) 9,52 (3/8) 62
657 - 006 - 25