Husqvarna 135 Mark II - INTRODUCTION; Operators Manual; Overview of Components

Contents
INTRODUCTION............................................................ 2
SAFETY..........................................................................4
ASSEMBLY.................................................................. 10
OPERATION.................................................................11
MAINTENANCE............................................................16
TRANSPORTATION.....................................................21
STORAGE.................................................................... 21
TECHNICAL DATA.......................................................21
ACCESSORIES............................................................22
CONTENTS OF THE EC DECLARATION OF
CONFORMITY..............................................................23
INTRODUCTION
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
1. Cylinder cover
2. Primer bulb
3. Product and serial number plate
4. Information and warning decal
5. Stop switch
6. Rear handle
7. Fuel tank
8. Starter rope handle
9. Starter housing
10. Felling direction mark
11. Chain oil tank
12. Front handle
13. Chain brake and front hand guard
14. Muffler
15. Saw chain
16. Bar tip sprocket
17. Guide bar
18. Chain tensioning screw (130)
19. Chain tensioning screw (135 Mark II)
20. Spike bumper
2 862 - 001 - 20.09.2018