Husqvarna 136LiC User Manual (English)

Other manuals for Husqvarna 136LiC

Questions and Answers:

R
Robert BlakeAug 31, 2025
What to do if Husqvarna 136LiC Trimmer warning sign flashes red on battery?
- A
  Amanda BruceAug 31, 2025
  If a warning sign flashes red on the battery of your Husqvarna Trimmer when the start button is pressed, it could indicate: * The temperature is too high. Wait until the battery has cooled down, or insert it into the charger to cool it down faster. * Low voltage. Charge the battery. * The temperature is too low. Ensure the battery temperature is above -10°C. * A defective battery. Replace the battery if necessary.
E
Eric BakerAug 30, 2025
What to do if Husqvarna 136LiC shows red light after installing new control unit?
- R
  ramoschristopherAug 30, 2025
  If your Husqvarna Trimmer shows a red light after installing a new control unit, it may be because the spare part comes without software. Use a diagnostic tool to install the software.
B
brianhermanAug 29, 2025
Why Husqvarna 136LiC Trimmer motor speed is changing?
- D
  Daniel TaylorAug 29, 2025
  If the motor speed of your Husqvarna Trimmer is changing, it could be caused by: * A defective connection in the main switch signal connector. Ensure the connector is correctly assembled, dry, undamaged, and free from corrosion. * A damaged or worn main switch. If so, replace the main switch.
U
urodriguezAug 28, 2025
What to do if Husqvarna 136LiC Trimmer shows red light on keypad?
- D
  Dr. Brenda BrownAug 28, 2025
  If a warning sign on the keypad of your Husqvarna Trimmer shows a red light, it indicates that permanent error codes are preventing the product from running. Erase the error codes using a diagnostic tool. It may also indicate a broken control unit, in which case you should replace it.
N
Nicole VasquezAug 27, 2025
What to do if Husqvarna Trimmer keypad lights flash?
- K
  Kimberly WardAug 27, 2025
  If the keypad lights on your Husqvarna Trimmer are flashing, it could be due to: * A defective connection in the keypad connector. Ensure the keypad connector is correctly assembled, dry, undamaged, and free from corrosion. * A short circuit in the keypad. In this case, replace the keypad.
B
Brandon JacobsAug 27, 2025
What to do if my Husqvarna 136LiC Trimmer will not start?
- A
  Alyssa BrownAug 27, 2025
  If your Husqvarna Trimmer isn't starting, several components could be the cause. Here's what you should check: * Inspect the battery. * Inspect the fuse. * Inspect the cables. * Inspect the safety switch. * Inspect the breaker. * Inspect the electric motor. If the issue continues after checking these, consider changing the control unit.
T
Tammy ClarkAug 25, 2025
What to do if Husqvarna Trimmer charger does not start?
- M
  msmithAug 25, 2025
  If the charger for your Husqvarna Trimmer doesn't start and no LEDs come on when the battery is attached, consider the following: * Check for a defective connection between the charger and battery. Ensure the power plugs are clean and undamaged. * The battery may be defective. Check the battery start. * The charger may be defective. Disconnect the charger from the mains outlet for at least 1 minute, then reconnect it. Verify that the fan starts and the green LED illuminates for about 3 seconds. If not, replace the charger.

Husqvarna 136LiC Specifications

General

Battery Voltage	36 V
Cutting Width	33 cm
Telescopic Shaft	Yes
Plant Guard	Yes
Vibration Level	2.5 m/s²
Type	Cordless Grass Trimmer

Summary

KEY TO SYMBOLS

Symbols on the machine

Explains symbols used on the machine for operation and safety.

Symbols on the battery and/or on the battery charger

Details symbols found on the battery and charging unit for correct usage and safety.

KEY TO SYMBOLS

Symbols in the operator's manual

Describes symbols used within the operator's manual to convey important information.

Note the following before starting:

Please read the operator's manual carefully

Emphasizes the critical importance of reading and understanding the entire operator's manual before use.

INTRODUCTION

Dear Customer,

A welcome message from the manufacturer, providing background and product information.

WHAT IS WHAT?

What is what?

Identifies and labels all the parts of the machine for user familiarity and operation.

GENERAL SAFETY PRECAUTIONS

General power tool safety warnings

Provides essential safety warnings applicable to all power tools, including shock and injury risks.

Personal safety

Outlines crucial personal safety measures, including protective equipment and common sense during operation.

Power tool use and care

Details guidelines for the proper use and care of power tools to ensure safe and effective operation.

Always use common sense

Stresses the importance of exercising caution and judgment, especially in uncertain situations.

GENERAL SAFETY PRECAUTIONS

Personal Protective Equipment (PPE)

Specifies the required personal protective equipment (PPE) for safe operation of the machine.

Essential Safety Gear

Covers hearing, eye protection, gloves, boots, and clothing for user safety.

First Aid and Battery Safety

Emphasizes having a first aid kit and adhering to battery and charger safety guidelines.

GENERAL SAFETY PRECAUTIONS

Battery safety

Provides critical safety instructions for handling and storing the rechargeable battery to prevent hazards.

Battery charger safety

Outlines safety precautions for using the battery charger to avoid electric shock and fire risks.

GENERAL SAFETY PRECAUTIONS

Keypad

Explains the function of the machine's keypad, including indicators and buttons for operation.

Power trigger lockout

Describes the safety mechanism of the power trigger lockout designed to prevent accidental starts.

GENERAL SAFETY PRECAUTIONS

Cutting equipment

Details how to choose and maintain cutting equipment for optimal performance and longevity.

Cutting attachment guard

Explains the purpose and importance of the cutting attachment guard for operator safety.

GENERAL SAFETY PRECAUTIONS

Trimmer head

Provides instructions and warnings related to the trimmer head and its proper use.

ASSEMBLY

Fitting the loop handle

Step-by-step guide on how to assemble and attach the loop handle to the machine.

BATTERY HANDLING

Battery Status and Charging Indicators

Explains how to interpret battery status and charging indicators for optimal management.

Battery Charger Safety and Connection

Covers safety warnings and connection procedures for the battery charger.

Connecting Battery to Charger

Step-by-step guide for connecting the battery to the charger for optimal charging.

BATTERY HANDLING

Transport and storage

Guidelines for safely transporting and storing the battery and charger to prevent damage or hazards.

Disposal of the battery, battery charger and machine

Information on the correct and environmentally friendly disposal of the product components.

STARTING AND STOPPING

Check before starting

A checklist of pre-operation checks to ensure the machine is safe and ready for use.

Connect battery to the machine

Instructions on how to correctly insert and secure the battery into the machine.

Starting and stopping

Step-by-step guide on how to start and stop the machine safely.

WORKING TECHNIQUES

General working instructions

Provides fundamental instructions for working with the lawn trimmer safely and effectively.

Basic safety rules

Covers essential safety rules, including protective gear and environmental awareness.

Safety instructions while working

Offers specific safety advice for maintaining balance, posture, and situational awareness during operation.

WORKING TECHNIQUES

Safety instructions after completing work

Outlines safety procedures to follow once work on the machine is finished.

SavE mode

Explains the battery-saving function (SavE mode) for extended runtime and efficient operation.

Automatic switch off functionality

Describes the automatic shutdown feature that deactivates the machine after a period of inactivity.

Grass trimming with a trimmer head

Provides techniques and precautions for trimming grass effectively with the trimmer head.

WORKING TECHNIQUES

Clearing

Details the clearing technique for removing vegetation and the associated wear on the cord.

Cutting

Advises on optimal cutting techniques for reaching difficult grass areas and avoiding damage.

Sweeping

Explains the sweeping technique using the rotating cord for efficient debris removal.

MAINTENANCE

Inspection and maintenance

Covers regular inspection and maintenance tasks required to keep the machine in good working order.

Trimmer line

Instructions on how to check and maintain the trimmer line for optimal cutting performance.

Trimmer head

Guide on inspecting, removing, and replacing the trimmer head for maintenance.

Cleaning

Procedures for cleaning the machine, battery, and charger after use to ensure longevity.

MAINTENANCE

Troubleshooting schedule

A guide to diagnosing and resolving common issues with the machine, battery, and charger.

Keypad

Troubleshooting specific faults indicated by the control panel keypad and LEDs.

Battery

Troubleshooting common battery issues related to charging and performance.

Battery charger

Troubleshooting common problems with the battery charger and its indicators.

MAINTENANCE

Maintenance schedule

A schedule outlining daily, weekly, and monthly maintenance tasks for the machine.

TECHNICAL DATA

Technical data

Presents detailed technical specifications, including motor, weight, runtime, and noise emissions.

Motor

Specific details regarding the machine's motor type and performance characteristics.

Approved chargers for the specified batteries, BLi.

Lists compatible chargers for the BLi batteries, including voltage and power ratings.

Approved accessories

Information on recommended and approved accessories, such as trimmer heads, for use with the machine.

TECHNICAL DATA

EC Declaration of Conformity (Applies to Europe only)

Official declaration confirming the machine's compliance with relevant European directives and standards.

Related product manuals

Husqvarna 136LiC User Manual

Table of Contents

Other manuals for Husqvarna 136LiC

Questions and Answers:

Husqvarna 136LiC Specifications

Summary

KEY TO SYMBOLS

Symbols on the machine

Symbols on the battery and/or on the battery charger

KEY TO SYMBOLS

Symbols in the operator's manual

Note the following before starting:

Please read the operator's manual carefully

INTRODUCTION

Dear Customer,

WHAT IS WHAT?

What is what?

GENERAL SAFETY PRECAUTIONS

General power tool safety warnings

Personal safety

Power tool use and care

Always use common sense

GENERAL SAFETY PRECAUTIONS

Personal Protective Equipment (PPE)

Essential Safety Gear

First Aid and Battery Safety

GENERAL SAFETY PRECAUTIONS

Battery safety

Battery charger safety

GENERAL SAFETY PRECAUTIONS

Keypad

Power trigger lockout

GENERAL SAFETY PRECAUTIONS

Cutting equipment

Cutting attachment guard

GENERAL SAFETY PRECAUTIONS

Trimmer head

ASSEMBLY

Fitting the loop handle

BATTERY HANDLING

Battery Status and Charging Indicators

Battery Charger Safety and Connection

Connecting Battery to Charger

BATTERY HANDLING

Transport and storage

Disposal of the battery, battery charger and machine

STARTING AND STOPPING

Check before starting

Connect battery to the machine

Starting and stopping

WORKING TECHNIQUES

General working instructions

Basic safety rules

Safety instructions while working

WORKING TECHNIQUES

Safety instructions after completing work

SavE mode

Automatic switch off functionality

Grass trimming with a trimmer head

WORKING TECHNIQUES

Clearing

Cutting

Sweeping

MAINTENANCE

Inspection and maintenance

Trimmer line

Trimmer head

Cleaning

MAINTENANCE

Troubleshooting schedule

Keypad

Battery

Battery charger

MAINTENANCE

Maintenance schedule

TECHNICAL DATA

Technical data

Motor

Approved chargers for the specified batteries, BLi.

Approved accessories