Need help?Do you have a question about the Husqvarna 162 and is the answer not in the manual?
Procedure for starting the chain saw engine when it is cold, including choke operation.
Procedure for starting the chain saw engine when it is already warm, omitting choke usage.
Guidelines for safe handling of the chain saw during operation and transport.
Recommended personal protective equipment for chain saw operators.
Steps to follow for safe operation, especially during felling and cutting.
Routine checks and cleaning to be performed each working day on the chain saw.
Tasks to be performed weekly for the upkeep of the chain saw.
Procedures for checking leaks and preparing the saw for winter conditions.
Initial adjustment of the high and low speed needles for carburettor operation.
Fine-tuning the low speed needle for optimal idling and acceleration response.
Adjusting the high speed needle for correct engine performance at full throttle.
Essential cleaning and checks for daily operation of the chain saw.
Periodic checks and cleaning for the chain saw performed weekly.
In-depth cleaning and checks for the chain saw conducted monthly.
To Next Page
General
