Husqvarna 288XP - Technical Data

36 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
281XP 288XP
Engine
Cylinder displacement, cm
3
80,7 87
Cylinder bore, mm 52 54
Stroke, mm 38,0 38,0
Idle speed, rpm 2500 2500
Power, kW/ rpm 4,2/9000 4,5/9300
Ignition system
Manufacturer of ignition system SEM SEM
Type of ignition system AM 7 AM 7
Spark plug Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Tillotson Tillotson
Carburettor type HS 228 HS 228
Fuel tank capacity, litre 0,9 0,9
Oil pump capacity at 8,500 rpm, ml/min 9-12-15-18 9-12-15-18
Oil tank capacity, litre 0,5 0,5
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 7,6 7,6
Noise emissions
(see note 1)
Sound power level, measured dB(A) 116 117
Sound power level, guaranteed L
WA
dB(A) 117 117
Sound levels
(see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
106 106
Vibration levels
(see note 3)
Front handle, m/s
2
6,2 6,2
Rear handle, m/s
2
6,9 6,9
Chain/bar
Standard bar length, inch/cm 18/46 18/46
Recommended bar lengths, inch/cm 15-28/38-71 15-28/38-71
Usable cutting length, inch/cm 13-27/34-68 13-27/34-68
Chain speed at max. power, m/sec 20,0 20,7
Pitch, inch/mm 3/8 /9,52 3/8 /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7