Husqvarna 365 X-Torq - Chain Sharpening and Depth Gauge Adjustment

SERVICE DATA
12 – English
20Nm
5-6Nm T27
Min. 15Nm 13 mm
12-14 Nm T27
1-2Nm
14-15Nm 16 mm
12-14Nm 13 mm
1,5-2Nm T20
6-8Nm T27
22-25Nm 13 mm
8-10 Nm T27
(x4) 12-14 Nm T27
6-7Nm T27
3-4Nm T27
3-4Nm T27
1-2Nm T10
1-2Nm T10
1-2Nm T10
1-2Nm T10
1-2Nm T10
1-2Nm T10
 = Lubricate with two-stroke oil.
 = Lubricate with saw chain oil.
 = Lubricate with grease.
Figures next to components which are attached using bolts
give the appropriate tightening torques in Nm.
Key to diagrams
(Torx screws)