Husqvarna 460 Rancher - Technical Data; Specifications and Recommended Equipment

English – 41
TECHNICAL DATA
Technical data
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
455 Rancher II 455e Rancher II
455e Rancher II
TrioBrake
Motor
Cylinder displacement, cu.in/cm
3
3.38/55,5 3.38/55,5 3.38/55,5
Cylinder bore, inch/mm 1.85/47 1.85/47 1.85/47
Stroke, inch/mm 1.26/32 1.26/32 1.26/32
Idle speed, rpm 2700 2700 2700
Power, kW/hp @ rpm 2,6/3,5 @ 9000 2,6/3,5 @ 9000 2,6/3,5 @ 9000
Emissions Durability Period according to California Air
Resources Board, h.
300 300 300
Ignition system
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
Electrode gap, inch/mm 0.02/0,5 0.02/0,5 0.02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 0.93/0,44 0.93/0,44 0.93/0,44
Oil pump capacity at 9,000 rpm, ml/min 6-17 6-17 6-17
Oil tank capacity, US pint/litre 0.68/0,32 0.68/0,32 0.68/0,32
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 13.0/5,9 13.2/6,0 13.6/6,2
Chain/bar
Standard bar length, inch/cm 15/38 15/38 15/38
Recommended bar lengths, inch/cm 15-20/38-51 15-20/38-51 15-20/38-51
Usable cutting length, inches/cm 14-19/36-49 14-19/36-49 14-19/36-49
Pitch, inch/mm 3/8 / 9,52 3/8 / 9,52 3/8 / 9,52
Thickness of drive links, inch/mm 0.050/1,3 0.050/1,3 0.050/1,3
0.058/1,5 0.058/1,5 0.058/1,5
Drive sprocket type/teeth Spur/7 Spur/7 Spur/7
Chain speed at max. power, m/sec 20,0 20,0 20,0