Why is the red error LED flashing on my Husqvarna Aspire B8X-P4A Blower?
A flashing red error LED indicates: * A temperature deviation. Let the product cool down. * Dirt in the battery connectors or a blocked fan. Clean with compressed air or a soft brush.
What to do if the green LED is on and the red LED flashes on my Husqvarna Aspire B8X-P4A Blower?
If the green LED is on and the red LED flashes, it could be due to several reasons: * The battery may not be correctly installed in the battery charger. Remove the battery and reinstall it. * The battery connectors could be dirty. Clean them. * The ambient temperature might be too high or too low. Ensure you are using the battery charger in temperatures between 0 °C – +35 °C. * The battery could be defective. Consider replacing it.
What to do if the green LED flashes on my Husqvarna Aspire B8X-P4A Blower?
If the green LED flashes, it means the battery voltage is low. Charge the battery.
What does it mean if the green LED and red LED flash alternately on my Husqvarna Blower?
If the green and red LEDs flash alternately, it indicates that the battery is empty, so charge the battery. If that doesn't work, the battery might be damaged.
General| Battery Voltage | 18 V |
|---|---|
| Air speed | 46 m/s |
| Vibration Level | 2.5 m/s² |
| Displacement | Not applicable |
| Fuel Tank Capacity | Not applicable |
| Air Volume | 800 m³/h |
To Next Page
