Husqvarna CTH163T User Manual

CTH163T
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
532 44 03-74 Rev. 2

Husqvarna CTH163T Specifications

General

Engine Manufacturer	Briggs & Stratton
Cylinders	1
Fuel Type	Gasoline
Transmission Type	Hydrostatic
Blade Engagement	Manual
Deck Material	Steel
Warranty	2 years
Drive System	Rear Wheel Drive

Summary

Safety Rules and Precautions

Operator Training and Preparation

Essential guidelines for operator training and machine preparation for safe use.

Safe Operation Practices

Guidelines for safe operation, slope handling, and general driving rules.

Maintenance, Storage, and Child Safety Warnings

Critical Danger and Poison Warnings

Critical warnings regarding hazardous materials, battery handling, and emergency procedures.

Assembly and Setup Procedures

Operating the Tractor

Starting the Engine and Transmission Purge

Driving, Cruise Control, and ROS Operation

Slope Operation Warnings and Engine Shutdown

Critical warnings for slope operation and procedures for safe engine shutdown.

Maintenance and Adjustments

General Maintenance and Cleaning

Engine, Oil, Tires, and Brakes

Blade and Drive Belt Maintenance

Brake System Check and Mower Leveling

Troubleshooting Common Issues

Engine and Starting Problems

Troubleshooting guide for common engine starting and performance issues.

Electrical, Battery, and Cutting Problems

Troubleshooting steps for electrical, battery, lighting, and uneven cutting results.

Machine Vibrations and Other Faults