32-Husqvarna
OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
• Disengage the mower deck by depressing the
blade switch.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than “OFF” will cause the battery to
be discharged.
8052-001
Disengage the mower deck and move throttle to
minimum
8058-019
The mower deck’s lifting lever
8061-026
Place controls in neutral position
• Raise the mower deck by pressing the button on
the lever and pulling backward to the transport
position.
• When the machine is standing still, activate the
parking brake by pushing the lever button and
pulling the lever upward.
• Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
• Move the steering controls outward.
• Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
To Next Page
Loading...
