EasyManua.ls Logo

Husqvarna EZ24T - Maintenance and Lubrication; Recommended Maintenance Schedule

Husqvarna EZ24T
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34-Husqvarna
MAINTENANCE
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points not
described in this manual, visit an authorized service workshop. An annual service carried out by an authorized
service workshop is recommended to maintain your machine in the best possible condition and to ensure safe
operation.
Read Maintenance in the Safety section.
= Described in this manual
= Not described in this manual
= Refer to the engine manufacturer’s manual
Maintenance
Daily
At least
once
each
year
Maintenance
interval
in hours
Before After 25 50 100 300
Check the parking brake
Check the engine’s oil level (every refuelling)
Check the safety system
Check for fuel and oil leakages
Check/clean the engine’s cooling air intake
Check the mower deck
Check for loose hardware (screws, nuts)
Clean under the mower deck
Start the engine and blades, listen for unusual
sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys
Check the tyre pressures
Check battery
Sharpen/Replace mower blades
Clean the engine’s cooling air intake
2)
Clean the air cleaner’s pre-filter (foam)
2)
Clean the air cleaner’s filter cartridge
(paper filter)
2)
Check/adjust the parking brake
Inspect muffler/spark arrester

Related product manuals