Husqvarna FE 350 2021 User Manual

OWNER'S MANUAL 2021
FE 350
FE 350 ROCKSTAR EDITION
Art. no. 3402451en

Husqvarna FE 350 2021 Specifications

General

Displacement	349.7 cm³
Bore / Stroke	88 mm / 57.5 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooling
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Tire	140/80-18"
Engine Type	Single cylinder, 4-stroke
Fuel System	Electronic fuel injection
Clutch	Wet multi-disc clutch, hydraulically operated
Frame	Chromium-molybdenum steel
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm
Wheelbase	1485 mm
Fuel Tank Capacity	8.5 L
Lubrication	Pressure lubrication with 2 oil pumps
Rear Suspension	WP Xplor PDS shock absorber
Front Tire	90/90-21"

Summary

Means of Representation

Symbols Used

Explains the meaning of various symbols found in the manual.

Formats Used

Explains the typographical conventions used for clarity.

Safety Advice

Use Definition – Intended Use

Defines the proper and intended usage scenarios for the vehicle.

Safety Advice

Provides crucial safety instructions and general precautions for operation.

Degrees of Risk and Symbols

Explains the meaning of different risk levels and associated symbols.

Safe Operation

Outlines essential guidelines for safe vehicle operation.

Work Rules

Details the procedures and rules to follow when performing maintenance or repairs.

Important Notes

Manufacturer Warranty, Implied Warranty

Outlines the terms and conditions of the vehicle's warranty.

Service

Stresses the importance of regular and proper vehicle servicing.

View of Vehicle

View of Vehicle, Front Left (Example)

Illustrates and labels key components on the front left side.

View of Vehicle, Rear Right (Example)

Illustrates and labels key components on the rear right side.

Serial Numbers

Vehicle Identification Number

Details the location of the VIN for identification.

Engine Number

Provides the location where the engine number is stamped.

Controls

Clutch Lever

Describes the function and operation of the clutch lever.

Throttle Grip

Details the throttle grip and its function.

Combination Switch

Explains the function of the combination switch and its mappings.

Opening Fuel Tank Filler Cap

Step-by-step guide to opening the fuel tank cap.

Cold Start Button

Explains the cold start button's function and operation.

Steering Lock (FE EU)

Describes the steering lock mechanism for EU models.

Combination Instrument

Combination Instrument Overview

Provides a layout of the instrument panel and its components.

Setting the Combination Instrument

Guides users through initial setup and customization of the instrument.

Adjusting the Clock

Procedures for setting the time displayed on the instrument.

Speed, Time, and DST Distance 1

How to view and manage trip meter 1 data.

Preparing for Use

Advice on Preparing for First Use

Essential advice and checks before the initial ride.

Running-in the Engine

Guidelines for breaking in the engine properly.

Preparing the Vehicle for Difficult Operating Conditions

Steps to prepare the bike for various challenging environments.

Riding Instructions

Checks and Maintenance Measures When Preparing for Use

Pre-ride inspection checklist.

Starting the Vehicle

Instructions for starting the motorcycle engine safely.

Activating Traction Control

Guide on how to engage and use the traction control system.

Braking

Techniques and warnings related to using the brakes effectively.

Service Schedule

Required Work

Detailed list of maintenance tasks based on operating hours or time.

Tuning the Chassis

Compression Damping of the Shock Absorber

Explanation of shock absorber compression damping.

Adjusting the Rebound Damping of the Shock Absorber

Instructions for tuning rebound damping.

Checking the Static Sag of the Shock Absorber

Method for checking static sag of the rear suspension.

Adjusting the Compression Damping of the Fork

Instructions for tuning front fork compression damping.

Adjusting the Spring Preload of the Fork

How to adjust the fork spring preload.

Service Work on the Chassis

Bleeding the Fork Legs

Instructions for bleeding air from the front fork legs.

Removing the Fork Legs

Detailed procedure for removing the front fork assemblies.

Removing the Shock Absorber

Detailed procedure for removing the rear shock absorber.

Cleaning the Air Filter and Air Filter Box

Instructions for cleaning the air filter system.

Removing the Main Silencer

Procedure for removing the exhaust silencer.

Checking the Chain Tension

Method for checking the drive chain's tension.

Checking the Frame

Instructions for inspecting the motorcycle frame for damage.

Checking/Correcting the Fluid Level of Hydraulic Clutch

Procedure to check and adjust hydraulic clutch fluid.

Brake System

Checking the Brake Discs

Instructions for inspecting the brake discs for wear and damage.

Checking the Front Brake Fluid Level

Procedure to check the front brake fluid level.

Changing the Front Brake Linings

Steps for replacing the front brake pads.

Checking the Rear Brake Fluid Level

Procedure to check the rear brake fluid level.

Wheels, Tires

Removing the Front Wheel

Detailed procedure for removing the front wheel.

Installing the Front Wheel

Detailed procedure for installing the front wheel.

Checking the Tire Condition

How to inspect tires for wear, damage, and age.

Checking Spoke Tension

Method for checking and adjusting spoke tension.

Electrical System

Removing the 12-V Battery

Steps to safely remove the 12V battery.

Charging the 12-V Battery

Procedures for charging the 12V battery.

Changing Main Fuse

How to replace the main electrical fuse.

Removing the Headlight Mask with the Headlight

Steps to remove the headlight assembly.

Changing the Headlight Bulb

How to replace the headlight bulb.

Cooling System

Checking the Antifreeze and Coolant Level

How to check coolant and antifreeze levels.

Changing the Coolant

Procedure for completely changing the coolant.

Tuning the Engine

Adjusting the Play in the Throttle Cable

Instructions for adjusting throttle cable free play.

Changing the Mapping

Instructions for selecting different engine mapping modes.

Adjusting the Idle Speed

How to set the correct idle speed for the engine.

Service Work on the Engine

Changing the Fuel Screen

Procedure for replacing the fuel filter screen.

Changing the Engine Oil and Oil Filter, Cleaning the Oil Screen

Comprehensive guide to oil and filter change.

Cleaning, Care

Cleaning the Motorcycle

General instructions for washing and cleaning the vehicle.

Checks and Maintenance Steps for Winter Operation

Specific maintenance procedures for seasonal storage or winter use.

Storage

Preparing for Use After Storage

Procedures to follow before riding after storage.

Troubleshooting

Troubleshooting

A comprehensive guide to diagnosing and resolving common faults.

Blink Code

Blink Code

Explains diagnostic blink codes indicated by the malfunction lamp.

Technical Data

Engine

Specifications related to the engine.

Chassis

Specifications related to the chassis components.

Electrical System

Specifications for the electrical system components.

Fork

Specifications for the front fork suspension.

Shock Absorber

Specifications for the rear shock absorber.

Auxiliary Substances

Universal Oil Spray

Recommended universal oil spray.

Standards

SAE

Explanation of SAE viscosity classification for oils.

List of Symbols

Yellow and Orange Symbols

Describes symbols indicating warnings or errors.