Husqvarna FE 350s 2022

Questions and Answers

B
barnesoliviaAug 17, 2025
Why is my Husqvarna Motorcycle engine overheating?
- A
  Ashley AdamsAug 17, 2025
  If your Husqvarna Motorcycle engine is overheating, check for these potential issues: low coolant level in the cooling system (inspect for leaks and check the coolant level), insufficient airflow (switch off the engine when stationary), dirty radiator fins (clean the fins), foam formation in the cooling system (drain and refill the coolant), a bent radiator hose (replace the hose), or a defective thermostat (check the thermostat, which should open around 70 °C or 158 °F).
C
Calvin JohnsonAug 19, 2025
Why does my Husqvarna FE 350s 2022 engine have low power?
- B
  Brian Hill MDAug 19, 2025
  If your Husqvarna Motorcycle engine has too little power, the cause might be a heavily contaminated air filter (clean the air filter and air filter box), a very dirty fuel filter (change the fuel filter), a very dirty fuel screen (change the fuel screen), an error in the electronic fuel injection (read out the fault memory using the Husqvarna Motorcycles diagnostics tool), a leaky or deformed exhaust system or too little glass fiber yarn filling in the main silencer (check the exhaust system for damage and replace the glass fiber yarn filling), too little valve clearance (adjust the valve clearance), or a defective ignition system (check the ignition coil's secondary winding, the spark plug connector, and the stator winding).
A
anthonyadamsAug 22, 2025
Why does my Husqvarna FE 350s 2022 have high oil consumption?
- A
  ambercombsAug 22, 2025
  If your Husqvarna Motorcycle has high oil consumption, check if the engine vent hose is bent (straighten or replace it), if the engine oil level is too high (check and adjust the oil level), if the engine oil is too thin (change the oil and filter, and clean the oil screen), or if the piston and cylinder are worn (measure the piston/cylinder mounting clearance).
T
Todd ShawAug 26, 2025
What causes my Husqvarna Motorcycle engine to die while riding?
- C
  Charles DavisAug 26, 2025
  If the Husqvarna Motorcycle engine dies during a trip, it could be due to a lack of fuel (refuel) or a blown fuse 1 or 4 (replace the fuses).
L
Linda DuffyAug 28, 2025
Why does my Husqvarna FE 350s 2022 Motorcycle engine not speed up?
- H
  Heather FernandezAug 28, 2025
  If the Husqvarna Motorcycle engine does not speed up, it could be due to an error in the electronic fuel injection (read out the fault memory using the Husqvarna Motorcycles diagnostics tool) or a defective ignition system (check the ignition coil's secondary winding, the spark plug connector, and the stator winding of the alternator).
J
Jacob WatersAug 30, 2025
What to do if my Husqvarna FE 350s 2022 engine cannot be cranked?
- C
  Cody CharlesAug 30, 2025
  If the Husqvarna Motorcycle engine won't crank, possible causes include an operating error (ensure the start procedure is correctly followed), a discharged 12-V battery (charge the battery and check the charging voltage, open-circuit current, and stator winding), a blown main fuse (replace the fuse), a defective starter relay (check the starter relay), or a defective starter motor (check the starter motor).
A
Ashley McbrideSep 2, 2025
What to do if Husqvarna FE 350s 2022 engine turns over but won't start?
- P
  patriciarothSep 2, 2025
  If the Husqvarna Motorcycle engine turns but doesn't start, the issue could be due to an operating error (ensure the correct start procedure is followed), a disconnected quick release coupling (join the coupling), blown fuse 1 or 4 (replace the fuses), an incorrectly set idle speed (adjust the idle speed), a sooty or wet spark plug (clean, dry, or replace the spark plug), an incorrect spark plug gap (adjust to 1.0 mm or 0.039 in), a defective ignition system (check the ignition system), a frayed short-circuit cable or faulty stop button/emergency OFF switch (check the wiring harness and electrical system), or an error in the electronic fuel injection (read the fault memory using the Husqvarna Motorcycles diagnostics tool).
R
Richard WagnerSep 5, 2025
Why is the 12-V battery discharged on my Husqvarna Motorcycle?
- M
  mitchellwayneSep 5, 2025
  A discharged 12-V battery in your Husqvarna Motorcycle may be caused by the alternator not charging the battery (check charging voltage and the stator winding) or an unwanted electrical power consumer (check the open-circuit current).
A
alisha26Sep 7, 2025
What does it mean if the malfunction indicator lamp lights up on my Husqvarna FE 350s 2022 Motorcycle?
- C
  Charles NguyenSep 7, 2025
  If the malfunction indicator lamp lights up or flashes on your Husqvarna Motorcycle, there may be an error in the electronic fuel injection. Check the wiring for damage and the electrical plug-in connectors for corrosion and damage. Also, read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
J
Jamie GonzalezSep 10, 2025
Why are my Husqvarna FE 350s 2022 Motorcycle horn, brake light, turn signal, and radiator fan not working?
- T
  Taylor ScottSep 10, 2025
  If the horn, brake light, turn signal, and radiator fan are not working on your Husqvarna Motorcycle, the cause is likely a blown fuse 3. Replace the fuse.

Summary

Safety Advice

Intended Use and Misuse

Defines the vehicle's intended purpose and warns against misuse.

General Safety Instructions

Provides essential safety instructions and explains risk symbols.

Safe Operation and Protective Clothing

Covers safe operation practices and the importance of protective gear.

Vehicle Identification and Controls

Serial Numbers Overview

Locates vehicle identification, engine, fork, and shock absorber numbers.

Handlebar and Engine Controls

Identifies handlebar controls like levers, grips, and engine start/stop switches.

Fuel Tank and Steering Lock

Details fuel tank cap operation and steering lock mechanism.

Combination Instrument Guide

Instrument Overview and Settings

Overview of the instrument display and how to set its functions.

Displaying Speed and Distance Data

Explains how to view speed, time, and trip distances (DST1/DST2).

Preparing Your Motorcycle for Use

First Use Preparations and Safety

Essential advice and safety checks before the first ride.

Engine Running-In Procedure

Details the correct procedure for running in a new engine.

Adapting to Difficult Conditions

Prepares the vehicle for varied conditions like sand or mud.

Riding and Basic Operation

Pre-Ride Checks and Starting

Essential pre-ride checks and safe starting procedures.

Starting Off and Shifting Gears

Guides on starting to move and proper gear shifting techniques.

Braking and Stopping Procedures

Instructions on effective braking and safe stopping/parking.

Service Schedule and Maintenance

Required Maintenance Tasks

Lists essential maintenance tasks required at specific intervals.

Recommended Maintenance Services

Outlines additional recommended maintenance services for optimal performance.

Chassis Tuning and Adjustments

Shock Absorber Adjustments

Guides on adjusting compression, rebound damping, and spring preload.

Fork Adjustments

Details on adjusting fork compression, rebound damping, and spring preload.

Handlebar Position Adjustment

Explains how to adjust the handlebar position for rider comfort.

Chassis Service Procedures

Fork and Steering System Service

Procedures for bleeding forks, removing/installing fork legs and steering head bearing.

Shock Absorber and Fender Service

Details on removing/installing shock absorber and front fender.

Chain and Sprocket Maintenance

Guides on checking and cleaning the drive chain and sprockets.

Brake System Maintenance

Front Brake Adjustments and Checks

Covers adjusting brake lever, checking discs, fluid level, and linings.

Rear Brake Adjustments and Checks

Details checking rear brake fluid level and linings.

Wheels and Tires

Wheel Removal and Installation

Procedures for removing and installing front and rear wheels.

Tire Condition and Pressure

Guides on checking tire condition, tread depth, age, and pressure.

Spoke Tension Check

Explains how to check and correct spoke tension.

Electrical System Service

12-V Battery Maintenance

Covers battery removal, installation, and charging procedures.

Fuse Replacement Procedures

Details how to replace main and individual fuses.

Lighting System Service

Guides on changing headlight and turn signal bulbs, and checking headlight settings.

Cooling System Service

Coolant Level and Antifreeze Check

Explains how to check coolant level and antifreeze protection.

Coolant Draining and Refilling

Details procedures for draining, refilling, and changing the coolant.

Engine Tuning

Throttle Cable and Idle Speed Adjustments

Covers checking and adjusting throttle cable play and idle speed.

Throttle Response and Shift Lever Tuning

Explains throttle response maps and adjusting shift lever position.

Engine Service Procedures

Fuel System Maintenance

Guides on changing the fuel screen.

Engine Oil and Filter Service

Details checking engine oil level and changing oil/filter.

Cleaning and Care

Motorcycle Cleaning Guidelines

Provides instructions and precautions for cleaning the motorcycle.

Winter Operation Precautions

Outlines checks and maintenance for winter riding and storage.

Storage and Post-Storage Preparation

Long-Term Motorcycle Storage

Details steps for preparing and storing the motorcycle for extended periods.

Preparing for Use After Storage

Guides on post-storage checks and maintenance before riding.

Troubleshooting Common Issues

Engine Starting Problems

Addresses issues with engine cranking and starting.

Engine Performance Issues

Covers problems like engine not speeding up or losing power.

Electrical and Overheating Faults

Troubleshoots electrical faults and engine overheating.

Technical Specifications

Engine and Chassis Data

Provides detailed technical specifications for engine and chassis components.

Torque Specifications and Capacities

Lists engine and chassis tightening torques and fluid capacities.

Electrical System and Tire Data

Technical data for electrical system components and tire specifications.

Substances and Standards

Fluid and Fuel Specifications

Details specifications for brake fluid, coolant, and fuel.

Recommended Lubricants and Cleaners

Lists recommended auxiliary substances for maintenance and cleaning.

Industry Standards Explained

Explains relevant industry standards like JASO and SAE.