Husqvarna FE 350s 2023 User Manual

OWNER'S MANUAL 2023
FE 350s
Art. no. 3402638en

Husqvarna FE 350s 2023 Specifications

General

Brand	Husqvarna
Model	FE 350s 2023
Category	Motorcycle
Language	English

Summary

Understanding Manual Symbols and Formats

Symbols Used in the Manual

Explains the meaning of symbols used throughout the manual for clarity.

Typographical Formats Explained

Details the typographical conventions used in the manual for consistent understanding.

Essential Motorcycle Safety Guidelines

Intended Use and Misuse Warnings

Defines the vehicle's intended purpose and warns against improper usage.

Degrees of Risk and Warning Symbols

Explains hazard levels and associated symbols for critical safety alerts.

Essential Motorcycle Safety Guidelines

Overview of Vehicle Warning Labels

Identifies and locates important warning labels on the motorcycle for user awareness.

Key Operational and Warranty Information

Manufacturer Warranty and Service Requirements

Outlines warranty terms and the necessity of authorized service for coverage.

Motorcycle Component Identification

Front Left View of Motorcycle Components

Illustrates and labels key components visible from the front left side.

Locating Vehicle Identification Numbers

Vehicle Identification Number (VIN)

Details the location of the unique VIN for vehicle identification.

Motorcycle Control Operations

Handlebar Controls Overview

Describes the function and location of essential handlebar controls like levers and buttons.

Light and Signal Controls

Explains the operation of the light switch and turn signal switch for visibility.

Understanding the Digital Display

Combination Instrument Overview and Activation

Introduces the display layout and how to activate the instrument cluster.

Pre-Ride Checks and Setup

Advice on Preparing for First Use

Provides essential safety advice and recommendations for the initial operation of the vehicle.

Pre-Ride Checks and Setup

Running-in the Engine

Details the recommended procedure for running in the engine to ensure longevity.

Safe Motorcycle Operation Techniques

Checks and Maintenance Measures When Preparing for Use

Lists essential checks to perform before every ride for safe operation.

Safe Motorcycle Operation Techniques

Starting Off and Shifting, Riding

Explains the correct methods for starting the engine and shifting gears.

Scheduled Maintenance Intervals

Required Work

Lists mandatory service tasks and their recommended intervals for vehicle upkeep.

Chassis Suspension Adjustments

Checking the Basic Chassis Setting with Rider's Weight

Explains how to set up the chassis suspension based on rider weight.

Chassis Suspension Adjustments

Adjusting the Low-Speed Compression Damping of the Shock Absorber

Details procedures for adjusting low-speed compression on the shock absorber.

Chassis Component Maintenance Procedures

Bleeding the Fork Legs

Provides instructions for releasing excess pressure from the fork legs.

Chassis Component Maintenance Procedures

Checking the Steering Head Bearing Play

Explains how to check for play in the steering head bearing for safe handling.

Chassis Component Maintenance Procedures

Adjusting the Steering Head Bearing Play

Details the procedure for adjusting the steering head bearing play.

Brake System Checks and Maintenance

Adjusting the Basic Position of the Hand Brake Lever

Guides on adjusting the hand brake lever position for rider comfort and control.

Brake System Checks and Maintenance

Checking the Front Brake Fluid Level

Details procedures for checking the front brake fluid level.

Brake System Checks and Maintenance

Adjusting the Basic Position of the Foot Brake Lever

Guides on adjusting the foot brake lever position for rider comfort and control.

Wheel and Tire Servicing

Removing the Front Wheel

Step-by-step guide for safely removing the front wheel.

Wheel and Tire Servicing

Removing the Rear Wheel

Provides instructions for removing the rear wheel from the motorcycle.

Wheel and Tire Servicing

Checking the Tire Condition

Explains how to inspect tires for cuts, wear, and damage.

Electrical System Maintenance

12-V Battery Service Procedures

Covers removal, installation, and charging of the 12-V battery.

Electrical System Maintenance

Changing Main Fuse

Guides on how to locate, check, and replace the main fuse.

Electrical System Maintenance

Removing the Headlight Mask with the Headlight

Details the procedure for removing the headlight assembly from the motorcycle.

Electrical System Maintenance

Checking the Headlight Setting

Explains how to verify and adjust the headlight's beam aim.

Coolant System Maintenance

Checking the Antifreeze and Coolant Level

Explains how to check coolant level and antifreeze protection.

Coolant System Maintenance

Draining the Coolant

Provides instructions for safely draining the cooling system.

Engine Performance Adjustments

Checking the Play in the Throttle Cable

Details how to check throttle cable play for optimal throttle response.

Engine Performance Adjustments

Adjusting the Idle Speed

Explains how to set the engine's idle speed correctly.

Engine Maintenance Procedures

Changing the Fuel Screen

Step-by-step guide for replacing the fuel filter screen.

Engine Maintenance Procedures

Changing the Engine Oil and Oil Filter, Cleaning the Oil Screen

Covers the process for changing engine oil and oil filter, and cleaning the oil screen.

Motorcycle Cleaning and Protection

Cleaning the Motorcycle

Provides instructions for washing and drying the motorcycle safely and effectively.

Motorcycle Storage Guidelines

Preparing for Use After Storage

Details procedures for getting the motorcycle ready after it has been stored.

Common Motorcycle Faults and Solutions

Engine Starting and Running Issues

Addresses common problems like engine not cranking or not starting.

Common Motorcycle Faults and Solutions

Engine Performance and Overheating Faults

Covers issues related to engine speed, power, and overheating.

Motorcycle Technical Specifications

Engine Specifications and Tightening Torques

Provides detailed engine specs, including tightening torques for various components.

Motorcycle Technical Specifications

Capacities and Chassis Data

Lists fluid capacities, chassis dimensions, and tire specifications.

Motorcycle Technical Specifications

Electrical System and Tire Specifications

Lists electrical component specs and recommended tire sizes.

Motorcycle Technical Specifications

Fork and Shock Absorber Specifications

Details suspension specs including damping and spring preload settings.

Motorcycle Technical Specifications

Chassis Tightening Torques

Provides a comprehensive list of torque specifications for chassis components.

Recommended Fluids and Materials

Brake Fluid, Coolant, and Engine Oil Standards

Specifies the required standards and types for brake fluid, coolant, and engine oil.

Approved Cleaning and Lubrication Products

Air Filter, Chain, and Grease Products

Lists recommended cleaners, lubricants, and sprays for maintenance.

Technical Industry Standards Explained

JASO T903 MA2 Standard Explained

Explains the JASO T903 MA2 standard for motorcycle engine oils.

Glossary of Special Terms

OBD - On-board Diagnosis Explained

Defines the term OBD in the context of vehicle electronics monitoring.

List of Abbreviations

Commonly Used Abbreviations

Provides a list of common abbreviations used in the manual.

Understanding Warning and Information Symbols

Yellow and Orange Warning Symbols

Explains symbols indicating error conditions and requiring prompt attention.

Green and Blue Information Symbols

Clarifies symbols that provide informational messages to the user.