Why are the high beam, low beam, tail light, position light, and license plate lamp not working on my Husqvarna Motorcycle?
If the high beam, low beam, tail light, position light, and license plate lamp are not working on your Husqvarna Motorcycle, it is likely due to a blown fuse 2. Replace it with a new one.
General| Displacement | 449.9 cc |
|---|---|
| Bore x Stroke | 95 mm x 63.4 mm |
| Compression Ratio | 12.75:1 |
| Throttle Body | 42 mm |
| Starter | Electric Starter |
| Transmission | 6-speed |
| Front Brake Diameter | 260 mm |
| Rear Brake Diameter | 220 mm |
| Front Suspension Travel | 300 mm |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Ground Clearance | 370 mm |
| Engine Type | Single-cylinder, 4-stroke |
| Final Drive | Chain |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Fuel Capacity | 8.5 L |
Explains various symbols used in the manual for clarity and meaning.
Defines the intended purpose and usage scope for different regions.
Describes actions considered misuse and potential dangers.
Provides general instructions and highlights the importance of safety labels.
Explains risk levels (Danger, Warning, Caution, Note) and associated symbols.
Warns against tampering with noise control systems and emission devices.
Covers essential safety rules for operating the vehicle safely.
Emphasizes the importance of wearing appropriate protective gear.
Outlines rules and procedures for performing maintenance and repairs.
Details warranty conditions and the necessity of authorized service.
Provides guidance on fuel usage and handling of auxiliary substances.
Highlights the importance of regular service for optimal operation and longevity.
Illustrates and labels key components from the front left view.
Shows and labels main parts from the rear right perspective.
Explains where to find the VIN on the vehicle.
Indicates the location of the engine number.
Describes the clutch lever and its automatic adjustment.
Explains the function and location of the front brake lever.
Identifies the location of the throttle grip.
Locates the stop button for EU models.
Details the horn button and its operation.
Explains the operation of the light switch for EU models.
Identifies main parts of the display and controls.
Describes common messages and their meanings.
Guides on setting units and other display options.
Essential safety and pre-ride checks before initial use.
Guidelines for the engine break-in period to ensure longevity.
Advice for riding in challenging environments like sand or mud.
Explains battery performance and charging at low temperatures.
Specific preparations for riding on dry sandy terrain.
Steps for preparing the motorcycle for wet sand conditions.
Pre-ride checks to ensure safety and proper functioning.
Step-by-step guide for starting the engine safely.
How to engage and disengage the traction control system.
Guidance on gear changes and general riding techniques.
Instructions on proper braking techniques and safety.
Procedures for safely stopping and parking the motorcycle.
Lists essential maintenance tasks based on operating hours.
Outlines recommended maintenance based on time intervals.
How to set up suspension based on rider weight.
Explains low-speed and high-speed compression damping.
Guide to adjusting low-speed compression damping.
Steps for adjusting high-speed compression damping.
Steps to check the riding sag with rider weight.
Guide to adjusting the rear shock absorber spring preload.
How to adjust front fork compression damping.
Instructions for adjusting front fork rebound damping.
Guide to adjusting front fork spring preload.
Safe procedure for lifting the motorcycle.
Steps to remove the fork protector.
Step-by-step guide to removing the front fork legs.
How to check for play in the steering head bearing.
Procedure for adjusting steering head bearing play.
Guide to removing the rear shock absorber.
Steps for reinstalling the rear shock absorber.
Steps to remove the air filter box cover.
How to remove the exhaust silencer.
Steps for installing the exhaust silencer.
Procedure for removing the fuel tank.
Guide to cleaning the drive chain.
Steps for adjusting the drive chain tension.
Inspecting wear on the drive chain components.
How to check and adjust hydraulic clutch fluid level.
Step-by-step guide to changing clutch fluid.
Adjusting hand brake lever reach for rider comfort.
How to check brake disc thickness and for damage.
Procedure for checking front brake fluid level.
Guide to replacing front brake pads.
Procedure for checking rear brake fluid level.
How to check rear brake pad thickness and condition.
Guide to replacing rear brake pads.
Step-by-step guide to removing the front wheel.
Instructions for correctly installing the front wheel.
How to remove the rear wheel from the swingarm.
Steps for reinstalling the rear wheel.
How to inspect tires for wear, damage, and age.
Guide to checking and setting correct tire pressures.
How to check and adjust spoke tension for wheel trueness.
Safe procedure for disconnecting and removing the battery.
Steps for correctly installing and connecting the battery.
Guide to charging the motorcycle battery, including precautions.
How to locate and replace the main fuse.
Steps to remove the headlight assembly.
How to replace the main headlight bulb.
How to check and verify headlight aim.
Guide to adjusting headlight beam height.
How to check coolant concentration and level.
Steps for refilling the cooling system with new coolant.
Guide to the complete process of changing coolant.
How to measure and check throttle cable free play.
Steps to adjust throttle cable slack.
Instructions for selecting different engine performance modes.
How to set the correct engine idle speed.
How to replace the fuel filter screen.
Procedure to check engine oil level at different temperatures.
Comprehensive guide to oil and filter change.
Steps to add engine oil if the level is low.
Detailed instructions for washing and cleaning the bike safely.
Specific care required for winter storage and use.
Steps for preparing the motorcycle for long-term storage.
Guide to getting the motorcycle ready after storage.
Specifications related to the engine.
Torque specifications for engine fasteners.
Technical data for the chassis, suspension, and dimensions.
Torque values for various chassis fasteners.
Information on coolant types, protection, and mixtures.
Engine oil specifications, standards, and recommended types.
Fuel specifications and ethanol content guidelines.
Recommended cleaner for the drive chain.
Recommended long-life grease for components.
Recommended oil for foam air filters.
Recommended universal oil spray.
Explanation of the JASO T903 MA2 standard for motorcycle oils.
Explanation of SAE viscosity classifications for oils.
Definition of On-board diagnosis system.
Explains warning and error indicator symbols.
Explains informational indicator symbols.
To Next Page