12 SERVICE WORK ON THE CHASSIS
74
S03542-10
Main work
–
Remove all screws, take off silencer cap
1
with O-ring
2
.
Info
Do not remove the glass fiber yarn filling.
Caution
Danger to health Soot particles irritate the eyes and mucuous membranes.
– Wear suitable breathing and eye protection when cleaning the main silencer and carbon screen.
–
Clean main silencer sleeve
3
and screen
4
of the spark arrestor with compressed air.
–
Position silencer cap
1
with O-ring
2
.
– Mount and tighten all of the screws.
Guideline
Screws on main silencer M5 7 Nm (5.2 lbf ft)
Finishing work
– Install the main silencer. ( p. 73)
– Install the right side cover. ( p. 72)
– Mount the seat. ( p. 68)
– Install the air filter box cover. ( p. 69)
To Next Page
Loading...
Need help?
General
