Husqvarna Jonsered CS 2245 - Page 40

40 – English
Assemble on the saw
1. Assemble the fuel pump and suction hose on
the carburettor.
2. Assemble the fuel hose. (F)
3. Position the carburettor.
4. Fit the return hose (G) on the fuel pump.
5. Fit the throttle cable. (E)
(see fi gure 40)
6. Assemble the fi lter holder in the rubber moun-
tings. (B)
7. Snap the purge into the fi lter holder.
8. Secure the screws. (A)
(see fi gure 41)
9. Assemble the air fi lter and cylinder cover.
Repair instructions
Fig 41
Fig 40
D
E
F
C
G
C