General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be lled
with engine oil.
When lubricating with grease, unless otherwise
stated, use high grade molybdenum disulphide
grease.
For daily use, the machine should be lubricated
twice weekly.
*
Change hydraulic drive lters.
p Change engine oil every 50 hours.
12/12 Every year Lubricate with grease gun
1/52 Every Week Filter change
1/365 Every day Oil change
Level check
Lubrication Schedule
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the
belts or the drive surfaces on the belt pulleys.
Should this happen, attempt to clean them with
spirits. If the belt continues to slip after cleaning,
it must be replaced. Gasoline or other petroleum
products must not be used to clean belts.
28
LUBRICATION
To Next Page
Loading...
