EasyManua.ls Logo

Husqvarna P-ZT4822 - Troubleshooting Engine Issues; Engine Start and Running Problems

Husqvarna P-ZT4822
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

49
Problem Cause
Engine will not start.
Blade switch is engaged.
Steering controls are not locked in the neutral
position.
Parking brake is not activated.
Battery is dead.
Contamination in the carburetor or fuel line.
Fuel supply is closed or the tap for the fuel tank is
in the wrong position.
Clogged fuel lter or fuel line.
Faulty ignition system.
Starter does not turn the engine over. Dead battery.
Poor contacts on the battery terminal cable
connections.
Fuse blown.
Ignition system faulty.
Fault in the starter safety circuit. See Safety
System in the Maintenance section
Engine runs rough. Faulty carburetor.
Choke control is pulled out with warm engine.
Clogged fuel lter or jet.
Clogged ventilation valve on the fuel cap.
Fuel tank nearly empty.
Fouled spark plug.
Spark plug is loose.
Rich fuel mixture or fuel-air mixture (gasoline).
Wrong fuel type (gasoline).
Water in the fuel (gasoline).
Clogged air lter.
Engine seems weak. Clogged air lter.
Fouled spark plugs.
Carburetor incorrectly adjusted.

Related product manuals